Here are some valuable Maintenance Tips for your Marble:
-
Protect the floor with a premium penetrating sealer to reduce etch marks and prevent stains and moisture from filtering into the marble. To apply the sealer properly, call a professional stone care company. Traffic areas should be resealed on a yearly basis.
. .
-
Install walk off matt by the main door to prevent sand and grit from spreading on the floor causing scratches and dullness. A good quality mat will capture dirt before someone walks on the floor. When it is placed outside your door it will signal people that they need to wipe their feet before entering the house.
-
Protect all furniture legs that come in contact with the marble with special felt pads or plastic (can be purchased in home centers). Proper protection will reduce the damage from scratches.
-
Place all plants on a special base to prevent deep stains and scratches.
-
Use only neutral cleaners or stone soap liquid specifically formulated for natural stone that will not harm the surface.
-
Dust mop or vacuum the floor at least 1-2 times per week to eliminate sand and grit to reduce possibilities of scratches. Do not use oil-treated dust mops on marble surfaces. Do not get the dust mop wet; if the floor is wet, be sure to dry it before dust mopping. Run the dust mop in one direction, do not move it back and forth. Always store the dust mop keeping its head off the ground. Wash it in cold water with laundry detergent and machine dry.
-
Damp mop the floor regularly 1-2 times per week to remove dirt and soil. Mix solutions as per manufacturers directions. Always use clean cold or warm water. Do not use hot water since it will cause the floor to streak. It is important to rinse and wring the mop as often as possible. If you don’t rinse the mop enough you will only be pushing dirt.
-
Blot spills with paper towel. Don’t wipe because it will spread the spill. Flush the area around the floor and then when the floor dries, it will streak or appear dingy. If your marble tends to streak every time that you mop the floor, then dry the marble with a clean terry cloth towel or buff with a residential buffing machine.
